Search Results
292 Products for "HUS2 screw anchor"
Filter
- Description
- Premium-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA
- Description
- Economical screw anchor for light-duty fastening in concrete and masonry (carbon steel, flat head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Flat head
- Approvals / test reports
- Fire
- Description
- High-performance screw anchor for quicker permanent fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- High performing hexagonal head screw anchor for fastening to concrete and masonry (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- High-performing countersunk head screw anchor for fastening to concrete and masonry (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Countersunk Torx
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, countersunk head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Countersunk Torx
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Collated screw auto-feed attachment for 25-51 mm long screws – for interior finishing applications
- Length
- 193 mm
- Magazine capacity
- 40
- Screw length - min.
- 25 mm
- Description
- Galvanised hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening plasterboard to metal
- Screw head type
- Bugle head
- Product class
- Premium
- Environmental conditions
- Dry indoor
- Description
- Galvanised hexagon screw corresponding to DIN 933
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Single drywall screw for fastening plasterboard to metal
- Screw head type
- Bugle head
- Product class
- Standard
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (A2 stainless steel) without washer for aluminium façade fastenings (up to 4 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 13 mm
- Base materials
- Aluminium
- Description
- Single drywall screws (phosphate-coated) for fastening drywall boards to metal
- Screw head type
- Bugle head
- Environmental conditions
- Dry indoor
- Description
- Interior metal framing screw with wafer head (zinc-plated) for fastening stud to track
- Screw head type
- Wafer head
- Product class
- Standard
- Environmental conditions
- Dry indoor
- Description
- Interior metal framing screw with pan head (zinc-plated) for fastening stud to track
- Screw head type
- Pan head
- Product class
- Standard
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- High-performance wedge anchor for everyday static and seismic loads in cracked concrete (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA, Fire, FM (Factory Mutual)
- Description
- Economical plastic impact anchor with A2 stainless steel screw
- Head configuration
- Flat head
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor (more than 1km to coast)
- Approvals / test reports
- N/A
- Description
- High-performance wedge anchor for everyday static loads in cracked concrete (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA, Fire, FM (Factory Mutual)
- Description
- Universal plastic anchor for light-duty fastening to hollow and solid base materials
- Base materials
- Concrete (aerated), Concrete (hollow core), Concrete (hollow deck), Concrete (lightweight), Concrete (non-cracked), Concrete (uncracked), Drywall, Limestone, Masonry (hollow), Masonry (hollow concrete block), Masonry (solid), Some natural stone
- Head configuration
- n/a
- Approvals / test reports
- N/A
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating, equivalent to 45 µm hot-dip galvanised
- Description
- Ultimate-performance foil adhesive capsule for heavy-duty anchoring in concrete
- Approvals / test reports
- ETA, Fire
- Base material condition
- Dry, Wet
- PROFIS software
- Yes
- Description
- Interior metal framing screw with wafer head (zinc-plated) for fastening stud to track
- Screw head type
- Wafer head
- Product class
- Standard
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for thin metal-to-metal fastenings (up to 3 mm)
- Screw drive/recess type
- Hexagon head
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- High-precision plumb laser with 2 points and red beam
- Accuracy
- ±1.5 mm at 10 m
- Max. operating distance (diameter)
- 30 m (Points)
- Maximum operating time
- 50 h
New
- Description
- Grade 8.8 bolt with hot-dip galvanised square washer used for assembling raised floor systems in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Green line laser with 2 high-visibility beams for levelling and aligning
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (Lines), 100 m (Lines, with receiver)
- Maximum operating time
- 8 h
- Description
- Economical plastic impact anchor with carbon steel screw
- Head configuration
- Flat head
- Approvals / test reports
- N/A
- Material, corrosion
- Carbon steel, zinc-plated
ultimate
- Description
- 1/2" long impact socket for tightening bolts and anchors
- Advantage 01
- Two detent holes to increase connection accuracy between the socket and ½" anvil
- Connection end
- 1/2 in square
- Advantage 02
- Dual-detent bevels
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts
- Material, corrosion
- Cast-iron, Multilayer coating
- Head configuration
- n/a
- Base materials
- Concrete (cracked), Concrete (uncracked)
ultimate
- Description
- 1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- High-strength load-bearing profile as part of the floor-spanning S2S system
- Material composition
- EN AW-6063 T66
- Perforation
- No
- Description
- Large S2S bracket with pre-assembled isolator
- Material composition
- EN AW-6063 T66, Polypropylene (PP)
- Insulation material
- Polypropylene
- Width
- 74 mm
- Description
- Compact 12V 2.6 Ah Li-ion battery
- Battery capacity
- 2.6 Ah
- Charging time with C4/12-50 battery charger
- 35 min
- Weight
- 0.24 kg
- Description
- Compact 22V 2.6 Ah Li-ion battery
- Battery capacity
- 2.6 Ah
- Weight
- 0.49 kg
- Dimensions (LxWxH)
- 135 x 94 x 53 mm
- Description
- Check gauge for HUS screw anchors
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Setting adapter for capsule anchor rods with hexagon heads
No technical data available
- Description
- High-power 22V 5.2 Ah Li-ion battery for extended run time
- Battery capacity
- 5.2 Ah
- Weight
- 0.8 kg
- Dimensions (LxWxH)
- 135 x 94 x 70 mm
- Description
- Galvanised channel foot for fastening channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH)
- 345 x 50 x 157 mm
- Weight
- 2.4 kg
- Fastener intake
- Single
- Description
- Compact, multi-purpose triple-mode SDS Plus (TE-C) rotary hammer – for hammer drilling and rotary-only drilling
- Weight according to EPTA-Procedure 01/2003 without battery
- 2.9 kg
- Optimum hammer drilling range
- 4 - 12 mm
- Single impact energy
- 1.8 J
- Description
- Short-stroke gas nailer for metal track
- Tool body weight
- 3.7 kg
- Fastener intake
- Collated
- Fastener length range
- 14 - 39 mm
Nuron
- Description
- Cordless LED work light with all-day battery life, rotating head and large hook for illumination of one-person jobs (Nuron battery platform)
- Brightness
- 500 lm
- Lux
- 350 lx @ 1 m
Nuron
- Description
- Compact and lightweight SDS Plus cordless rotary hammer with pistol grip for best manoeuvrability when drilling overhead (Nuron battery platform)
- Weight according to EPTA-Procedure 01/2003 without battery
- 2.3 kg
- Optimum hammer drilling range
- 4 - 12 mm
- Single impact energy
- 1.5 J
- Description
- Galvanised light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Subcompact-class 12V brushless drill driver for when you need access, low weight and high control
- Maximum torque (soft/hard joint)
- 21 Nm (soft joint), 34 Nm (hard joint)
- No load RPM
- gear 1: 400 rpm; gear 2: 1600 rpm
- Chuck clamping range
- 1 - 10 mm
- Description
- Accessories
- Accessory type
- Fastening elements
- Additional accessory information
- M12 clamping spindle for compact base plates (total length 125 mm)
- Description
- Base connector for anchoring strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
New
- Description
- Subcompact-class 12V multi-head cordless drill driver (offset, right-angle, 13 mm keyless and hex bit holder) for installation work in tight spaces and around corners
- Maximum torque (soft/hard joint)
- 21 Nm (soft joint), 34 Nm (hard joint)
- No load RPM
- gear 1: 400 rpm; gear 2: 1600 rpm
- Number of gears
- 2
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Accessory type
- Chucks
- Chuck type
- Keyed chuck
- Additional accessory information
- Drilling in wood or metal
- Description
- Accessories
- Accessory type
- Fastening elements
- Additional accessory information
- M16 clamping spindle for large base plates (total length 250 mm)
- Description
- Robust outdoor rotary laser level for horizontal levelling
- Accuracy
- ±0.5 mm at 10 m
- Operating range with laser receiver (diameter)
- 2 - 600 m
- Laser class
- <4.85 mW, 620-690 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- High-performance anchor rod for adhesive capsules in concrete (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- Economical plastic anchor for drywall
- Environmental conditions
- Indoor, damp conditions, Indoor, dry conditions, Outdoor
- Material composition
- Polyamide
- Type of fastening (global)
- Through-fastening, Pre-fastening
- Description
- High-performance anchor rod for adhesive capsules in concrete (5.8 carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (solid)
- Description
- Elongated angle bracket for assembling strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)