All prices discounted net
Ultra-light-duty, L-profile channel
- Material composition: S280 or better steel
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 1.2 mm
QAR 13.28
Ultra-light-duty, L-profile channel
- Material composition: S280 or better steel
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 1.5 mm
QAR 18.86
Light-duty profile channel for trapezes
- Material composition: S280 or better steel
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 1.75 mm
QAR 31.83
Light-duty profile strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 1.75 mm
QAR 37.62
Strut channel
- Material composition: S250 or better steel
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 2 mm
QAR 123.75
Punched and slotted strut channel, for outdoor use with low pollution
- Material composition: S250 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2 mm
QAR 206.91
Strut channel for trapezes
- Material composition: S280 or better steel
- Surface finish: Indoor Coated - Pre-galvanised
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
QAR 117.15
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Outdoor Coated - ZM
- Environmental conditions: Outdoor, low to moderate pollution (C3)
QAR 128.37
MT-40 Strut channel
New product
Strut channel
- Material composition: S280 or better steel
- Surface finish: Indoor Coated - Pre-galvanised
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
QAR 186.12
MT-40 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Outdoor Coated - ZM
- Environmental conditions: Outdoor, low to moderate pollution (C3)
QAR 247.50
MT-50 Strut channel
New product
Strut channel
- Material composition: S280 or better steel
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 2.75 mm
QAR 325.05
MT-50 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
QAR 360.36
MT-60 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
QAR 669.24
MT-70 OC Girder
New product
Square box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
QAR 1,422.96
MT-80 OC Girder
New product
Heavy-duty rectangular box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
QAR 1,584.00
MT-90 OC Girder
New product
Heavy-duty square box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
QAR 2,071.08
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
From
QAR 85.87
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coating
- Material thickness: 8 mm
From
QAR 92.60
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 10 mm
QAR 243.65
MT-C-L1 Corner angle
New product
Angle bracket for assembling light-duty strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
QAR 6.15
MT-C-L1 OC Corner angle
New product
Angle bracket for assembling light-duty strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 7.69
MT-C-L2 Corner angle
New product
Elongated angle bracket for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
QAR 7.97
MT-C-L2 OC Corner angle
New product
Elongated angle bracket for assembling strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 9.69
MT-C-T/1 Transverse connector
New product
Wing fitting for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
QAR 34.91
MT-C-T/1 OC Transverse connector
New product
Wing fitting for assembling strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 40.92
MT-C-LL1 Angle connector
New product
Right-angle connector for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 17.89
MT-C-LL1 OC Angle connector
New product
Right-angle connector for assembling strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 18.61
MT-C-LL2 Angle connector
New product
Right-angle, elongated connector for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 52.40
MT-C-T/2 Tee splice connector
New product
Node for assembling strut channels in a T shape
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 47.48
Node for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 51.66
MT-C-T A OC Corner bracket
New product
Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 37.52
MT-C-T 3D/2 OC Wing fitting
New product
Double wing fitting for connecting three strut channels in a 3D structure, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 53.92
MT-C-T 3D/3 Wing fitting
New product
Triple wing fitting for connecting four strut channels in a 3D structure
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
QAR 67.58
MT-C-T 3D/3 OC Wing fitting
New product
Triple wing fitting for connecting four strut channels in a 3D structure, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 79.79
MT-ES-40 Splice clevis
New product
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 37.57
MT-ES-40 OC Splice clevis
New product
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 38.50
MT-C-GS OC Angle bracket
New product
Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 3 mm
QAR 62.77
MT-C-GL OC Angle bracket
New product
Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 158.33
MT-C-GSP L OC Gusset plate
New product
Gusset plate for L-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 36.63
MT-C-GSP T OC Gusset plate
New product
Gusset plate for T-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 74.32
MT-C-GLP T OC Gusset plate
New product
Gusset plate for T-shaped connections with MT-80 or MT-100 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 139.10
MT-ES-90 OC Splice clevis
New product
Splice connector for coupling MT-90 or MT-100 girders end-to-end, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 6 mm
QAR 540.38
MT-B-L Light-duty baseplate for strut channels
New product
Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 8.15
MT-B-L OC Light-duty baseplate
New product
Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 9.50
MT-B-T OC Light-duty baseplate
New product
Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 35.90
MT-B-O2 Baseplate for strut channels
New product
Base connector for anchoring strut channel structures to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 58.85
MT-B-O2B 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
QAR 110.22
MT-B-O2B OC 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 8 mm
QAR 135.08
MT-B-O4 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
QAR 173.25
MT-B-O4 OC 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 8 mm
QAR 194.70
MT-B-GS T OC Girder baseplate
New product
Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 8 mm
QAR 226.38
MT-B-GS O4U OC Medium-duty baseplate
New product
Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 12 mm
QAR 481.80
MT-B-GL O4 OC Heavy-duty baseplate
New product
Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 12 mm
QAR 681.12
MT-B-GXL O4 OC Heavy-duty baseplate
New product
Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 12 mm
QAR 1,088.34
MT-AB A Adjustable brace fitting
New product
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 49.83
MT-AB A OC Adjustable brace fitting
New product
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 54.95
MT-AB-L 45 Angle brace
New product
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 18.84
MT-AB-L 45 OC Angle brace
New product
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 28.18
MT-AB-LL2 45 45-degree angle bracket
New product
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
QAR 21.58
MT-AB-LL2 45 OC 45-degree angle bracket
New product
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 37.29
MT-AB-G T Adjustable brace fitting
New product
Adjustable brace fitting for assembling MT girder structures, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
- Material thickness: 4 mm
QAR 45.13
MT-TLB Twist-Lock bolt
New product
Hexagon bolt for use with Twist-Locks when assembling strut channel structures
- Material composition: ISO 898-1 8.8
- Surface finish: Pre-galvanized - for dry indoor use only
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
From
QAR 1.74
MT-TLB OC Twist-Lock bolt
New product
Hexagon bolt for use with Twist-Locks when assembling strut channel structures, for outdoor use with low pollution
- Material composition: ISO 898-1 8.8
- Surface finish: Hot-dip galvanised plus - for outdoor use
- Environmental conditions: Outdoor, low to moderate pollution (C3)
QAR 2.16
MT-TFB OC Thread forming bolt
New product
Thread-forming bolt for use when assembling MT girder structures, for outdoor use with low pollution
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanised plus - for outdoor use
- Environmental conditions: Outdoor, low to moderate pollution (C3)
QAR 3.04
MT-EC-20 Strut end cap
New product
Channel end cap for MT-20 strut channels
- Material composition: PPB-M02
QAR 0.80
MT-EC-30 Strut end cap
New product
Channel end cap for MT-30 strut channels
- Material composition: PPB-M02
QAR 0.83
MT-EC-40/50 Strut end cap
New product
Channel end cap for MT-40 and MT-50 strut channels
- Material composition: PPB-M02
QAR 0.86
MT-EC-60 Strut end cap
New product
Channel end cap for MT-60 strut channels
- Material composition: PPB-M02
QAR 1.50
MT-EC-70 Girder end cap
New product
Channel end cap for MT-70 girders
- Material composition: PPB-M02
QAR 1.91
MT-EC-80 Girder end cap
New product
Channel end cap for MT-80 girders
- Material composition: PPB-M02
QAR 3.04
MT-EC-90 Girder end cap
New product
Channel end cap for MT-90 girders
- Material composition: PPB-M02
QAR 3.96
Nut for attaching media to MT strut channels
- Material composition: High Strength Steel
- Surface finish: Pre-galvanized - for dry indoor use only
From
QAR 7.43
Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanised plus - for outdoor use
From
QAR 7.67
Fixation plate with threaded hole for attaching media to strut channels
- Material composition: Q235 or better steel
- Surface finish: Indoor Coated - Electro galvanised
From
QAR 2.07
Fixation plate with threaded hole for attaching media to strut channels, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coated (HDG)
From
QAR 2.36
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanised - for outdoor use
From
QAR 18.88
Fixation plate with threaded hole for attaching media to strut channels
- Material composition: Q235 or better steel
- Surface finish: Indoor Coated - Electro galvanised
From
QAR 3.87
r12283999
New product
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coated (HDG)
From
QAR 4.05