Hot-dip galvanized installation channel
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
QAR 15,128.50
Hot-dip galvanized installation channel
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
QAR 597.95
Hot-dip galvanized installation channel
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S235JR - DIN EN 10025
QAR 1,049.03
Hot-dip galvanized installation channel
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S235JR - DIN EN 10025
QAR 1,258.83
Hot-dip galvanized bracket
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
QAR 98.31
Channel connector HDG plus
- Tightening torque: 40 Nm
- Material composition: Bolt: M10 grade 8.8 - DIN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111
- Surface finish: Multi-layer coating – performance in salt spray test equal to hot-dip galvanizing
QAR 12.18
Hot-dip galvanized pipe ring saddle
- Material composition: Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
QAR 12.40
Wing nut
- Tightening torque: 30 Nm
- Thread - M: M10
- Material composition: Wings: plastic PA, Nut: QStE 380 TM, SEW 92
QAR 4.72
Hot-dip galvanized drilled plate
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
QAR 7.37
Hot-dip galvanized rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: Channel connector: 4 mm, Baseplate: 6 mm
QAR 87.19
Covid 19 Working Hours Sundays to Thursdays: